CCD BLACK AND WHITE CAMERA
The camera shall be a solid state black and white video camera. The
pick-up device shall be a 1/3" interline transfer charge coupled
device (CCD) with equal to or greater than 250,000 picture elements.
Video output shall be provided through a BNC-type connector. Composite
video output shall be 1.0V p-p with 75 Ohm impedance and shall be EIA
RS-170 standard black & white video signal format. The camera shall
accept EE or DC-type lenses and be capable of supporting auto-iris type
lenses (video-type & DC type).
The camera shall have an internal isolation transformer.
The dimensions of the camera shall be 2.76"(W) X 2.36"(H) X
5.35"(D). The camera shall be enclosed in an extruded aluminum
case. Camera mounting shall be performed via a 1/4" X 20 threaded
hole in the camera casing. The camera shall be capable of being mounted
either from the top or bottom. Camera weight shall not exceed 24 oz.
Ambient operating temperature shall +14 degrees to +122 degrees
Fahrenheit. Ambient operating humidity shall be 30% to 90%.
Camera resolution shall be a minimum of 570 TV lines horizontal and
350 TV lines vertical. Synchronization shall be achieved via line-lock
24 volts AC 50/60Hz. There shall be provisions for vertical phase
adjustment. Signal-to-noise ratio shall be 50dB. AGC shall be automatic
and provide a minimum 12dB gain. The sensitivity of the camera shall
render a minimum subject illumination of 0.06 Lux (F1.2). The camera
shall have auto electronic shutter capable of 1/100,000 second. The
camera shall also have provision for backlight compensation.
Camera shall be powered by a 24 VAC, 60Hz power source. Power
consumption shall not exceed 5.5 W. The camera shall be UL and CUL