DIAGONAL COLOR MONITOR
The monitor shall be a color video monitor with a 13" diagonal
picture tube. It shall support EIA NTSC standard color composite video
signal (1.0 V p-p, 75 Ohm). It shall have a resolution of 450 lines.
Video input connector shall be BNC-type for composite and 4-pin (Y/C)
type for S-VIDEO. Video output connector shall be BNC-type for
composite. The monitor shall have a built-in speaker. Audio power output
shall be 1 W maximum. Audio input connector shall be RCA-type. Audio
input impedance shall be 47k Ohm or more. Rear panel shall have
provisions for termination control.
The monitor's power source shall be 120 VAC +\- 10%, 60Hz.
Front panel controls shall include reset, function, volume +, &
volume-. The monitor shall be controlled by means of on-screen
programming. The controls available via on-screen adjustment shall be
contrast, brightness, sharpness, color, & tint.
Dimensions shall not exceed 15.12"(W), 13.66"(H), and
14.45"(D). The monitor shall be rack mountable. The weight shall
not exceed 21 lbs.