All Secure CCTV Camera Systems

Home

Contact

Feedback

Info Request

News 

Robot

Video Products
HYPERSCAN SYSTEM EXPANSION & CONTROL MODULES
EX45, CC50, RC40

Video Expansion Module, Camera Control Module and Relay Control Module

HyperScan brought you long-distance video, alarm and record capabilities. Now use easy add-on modules to expand your HyperScan system. Expand video and alarm inputs, control camera motion and zoom, activate devices such as door strikes, lights and other equipment. It all happens over phone lines, cellular or satellite data channels. Modules integrate seamlessly and are controlled from one centralized and cost-effective HyperScan receiver station.

FEATURES

EX45 VIDEO EXPANSION MODULE
  • Expands system coverage
  • Increases video and alarm channels from 4 to 7, 10, 13 or 16 per transmitter

CC50 CAMERA CONTROL MODULE

  • Provides long-distance control of cameras or domes
  • Up to 16 cameras or domes per module
RC40 RELAY CONTROL MODULE
  • Provides long-distance control of electronic devices
  • Operates with up to four N/O relays, expandable to 4, 8, 12 or 16 contacts per transmitter
Complete long-distance coverage and control with HyperScan add-on modules

VIDEO EXPANSION MODULE

CAPABILITIES

  • Expands any HyperScan transmitter video and alarm input capacity from 4 to 7, 10, 13 or 16 inputs
  • Connects to and powered by transmitter's VIDI bus
  • Provides a transcoaxial interface for use with camera Pan/Tilt/Zoom drivers
  • Includes 18-inch VIDI bus cable

TECHNICAL SPECIFICATIONS
  • Video Input
    1.0 V p-p, Differential
     
  • Video Output
    1.0 V p-p, Differential
     
  • Termination
    75 Ohms or High-Z
     
  • Video Standard
    NTSC/EIA: 525 Lines, 60 Fields/Second
    PAL/CCIR: 625 Lines, 50 Fields/Second
     
  • Alarm Input
    One input per camera; activated by mechanical contact or TTL/CMOS active low
     
  • Connectors
    Alarm: 8-pin removable with screw terminals; alarm control as specified above
    VIDI in: RJ11 telephone
    VIDI out: RJ11 telephone
    Camera 1-4: BNC; composite video input from camera
    Video Out: BNC; composite video output to transmitter
     
 
  • Operating Power
    Supplied by transmitter via VIDI in connector
     
  • Construction
    Extruded aluminum
     
  • Dimensions
    5 in. H x 8 in. W x 1.25 in. D
    (127mm x 203mm x 32mm)
     
  • Weight
    1.25 lbs. (0.6 kg)
     
  • Ambient Temperature
    40 to 104 F (5 to 40 C)
     

System Diagram

 Video Expansion Module


ORDER INFORMATION
EX45: Video/Alarm Expansion Module
EX45D: Video/Alarm Expansion Module with Dome Control


CAMERA CONTROL MODULES

CAPABILITIES

  • Provides long-distance control of cameras
  • Integrates with HyperScan transmitters
  • Controlled by any HyperScan receiver

TECHNICAL SPECIFICATIONS
  • Connectors
    Power: 2.1 mm pin-type female; power input
    VIDI in: RJ11 telephone
    VIDI out: RJ11 telephone
    RS-232: DB9-S; full duplex RS-232, half duplex RS-422/RS-485 interface
    RJ45 interface
    RS-422/RS-485: RJ11 telephone; full duplex RS-422/RS-485 interface
     
  • Operating Power
    Center positive, 12VDC, 1A, 14 watts
     
 
  • Construction
    Extruded aluminum
     
  • Dimensions
    5 in. H x 8 in. W x 1.25 in. D
    (127mm x 203mm x 32mm)
     
  • Weight
    1.25 lbs. (0.6 kg)
     
  • Temperature
    40 to 104 F (5 to 40 C)
     

System Diagram

 Camera Control Module


ORDER INFORMATION
CC50: Camera Control Module and Power Supply for U.S.
CC50X: Camera Control Module with No Power Supply


DEVICE CONTROL MODULE

CAPABILITIES

  • Provides long distance control of electronic devices over standard or ISDN phone line
  • Operates with up to 4 N/O relays, cascade to 4, 8, 12 or 16
  • Connects to and powered by any HyperScan transmitter VIDI bus
  • Remotely operated via any HyperScan receiver

TECHNICAL SPECIFICATIONS
  • Relay Type
    Four normally open or normally closed dry contacts, 5.0 A @ 120 VAC or 30 VDC
     
  • Connectors
    VIDI in: RJ11 telephone
    VIDI out: RJ11 telephone
    Relay 1-4: 12-pin removable with screw terminals
     
  • Operating Power
    Supplied by transmitter via VIDI in connector
     
 
  • Construction
    Extruded aluminum
     
  • Dimensions
    5 in. H x 8 in. W x 1.25 in. D
    (127mm x 203mm x 32mm)
     
  • Weight
    1.25 lbs. (0.6 kg)
     
  • Ambient Temperature
    40 to 104 F (5 to 40 C)
     

System Diagram

 Device Control Module

ORDER INFORMATION

Model Description Price
TX51A 4 CAMERA COLOR TRANSMITTER $1580.80
TX51AM 4 CAMERA COLOR TRANSMITTER WITH MODEM $2135.90
TX61A 4 CAMERA B/W TRANSMITTER / HYPERSCAN $1264.90
TX61AM 4 CAMERA B/W TRANSMITTER WITH MODEM $1818.70
RX53Q COLOR TURNKEY RECEIVERS, 4-CHANNEL, WITH MONITOR & MODEM $11,506.30
RX50S HYPERSCAN RECEIVER SOFTWARE- SINGLE CHANNEL $1790.10
RX50Q HYPERSCAN RECEIVER SOFTWARE- FOUR CHANNEL TRUE COLOR $4481.10
RX53S COLOR TURNKEY RECEIVERS, 1-CHANNEL, WITH MONITOR & MODEM $6483.10
SI43 ROBOT SERIAL INTERFACE BOARD $937.30
EX45 4- CHANNEL B/W CAMERA EXPANSION MODULE TO BE USED WITH TX61 $471.90
RC40 RELAY CONTROL MODULE  $313.95
TB40 DIGITAL AUDIO COMMUNICATION MODULE $471.90
CC50 DOME CONTROL FOR UP TO 16 INPUTS $630.50
 Email for more information to sales@camerasite.com 
Specifications subject to improvement or change without notice.
 


Call 1-888-353-6983
       
Leasing is available    
     Click the INFO button to receive more information

Send mail to webmaster@cctvcam.com with questions or comments about this web site.
Copyright 2000 All Secure Alert Systems, Inc